myvtm/DevAdapter/cmbsz/gpio.1.2/gpio_impl.cpp

#include "gpio_impl.h"
#include<cstring>
#include <cstdio>
GPIOClassImpl::GPIOClassImpl()
        :m_mode(0)
{

}

GPIOClassImpl::~GPIOClassImpl()
{

}

ErrorCodeEnum GPIOClassImpl::GetDevCategory(DevCategoryInfo &devCategory)
{

    ErrorCodeEnum err = Error_Succeed;
    std::strcpy(devCategory.szModel, "szModel");
    //新接口版本标记
    std::strcpy(devCategory.szType, "szType#FUNCVER=2.0");
    std::strcpy(devCategory.szVendor, "szVendor");
    return err;
}

ErrorCodeEnum GPIOClassImpl::Reset()
{
    ErrorCodeEnum err = Error_Succeed;
    m_mode = 0;
    return err;
}


ErrorCodeEnum GPIOClassImpl::DevClose()
{
    ErrorCodeEnum err = Error_Succeed;
    return err;
}



ErrorCodeEnum GPIOClassImpl::GetLastErr(DevErrorInfo &devErrInfo)
{
    static int times = 0;
    char szMessage[128];
    sprintf(szMessage, "这是第 %d 条错误信息", ++times);
    strcpy(devErrInfo.szErrMsg, szMessage);
    devErrInfo.dwErrMsgLen = strlen(szMessage);
    return Error_Succeed;
}

ErrorCodeEnum GPIOClassImpl::SetStatus(DWORD dwReq, DWORD dwMode)
{
    ErrorCodeEnum ec = Error_Succeed;

    if ((dwMode & GPIO_DEV_LIGHT_MODE_LIGHT_SUSTAIN) && (dwMode & GPIO_DEV_LIGHT_MODE_LIGHT_FLICKER)) {
        return Error_Param;
    }
    if ((dwMode & GPIO_DEV_LIGHT_MODE_COLOR_NORMAL) && (dwMode & GPIO_DEV_LIGHT_MODE_COLOR_FAULT)) {
        return Error_Param;
    }

    switch (dwReq) {
    case GPIO_DEV_SN_LIGHT_CARDISSUER:
        if (dwMode & GPIO_DEV_LIGHT_MODE_COLOR_NORMAL) { //常规颜色
            if (dwMode & GPIO_DEV_LIGHT_MODE_LIGHT_FLICKER) { //闪烁

            }
        }
        if (dwMode & GPIO_DEV_LIGHT_MODE_COLOR_FAULT) { //故障状态的颜色，一般为红色
            if (dwMode & GPIO_DEV_LIGHT_MODE_LIGHT_SUSTAIN) { //常亮

            }
        }
        //....
        break;
    case GPIO_DEV_SN_LIGHT_IDCERTIFICATE:
        //....
        break;
    case GPIO_DEV_SN_LIGHT_PINPAD:
        //....
        break;
    case GPIO_DEV_SN_LIGHT_FACE:
        //....
        break;
    case GPIO_DEV_SN_LIGHT_CARDISSUER_MAINTAIN:
        //....
        break;
    case GPIO_DEV_SN_LIGHT_CONTACTLESSCARD:
        //....
        break;
    case GPIO_DEV_SN_LIGHT_FINGERPRINT:
        //....
        break;
    case GPIO_DEV_SN_LIGHT_SENSOR_ALL: 
    {
        if (dwMode == GPIO_DEV_LIGHT_MODE_RESET) {
            //熄灭当前的所有灯
        }
    }
        break;
    default:
        ec = Error_NotSupport;
        break;
    }
    return ec;
}

ErrorCodeEnum GPIOClassImpl::DetectStatus(DWORD dwReq, DWORD& dwMode)
{
    ErrorCodeEnum ec = Error_Succeed;
    dwMode = 0;

    if (dwReq & GPIO_DEV_SN_SENSOR_SHAKE) {
        //检测是否震动，如果震动，则对应的位置为1
        dwMode |= GPIO_DEV_SN_SENSOR_SHAKE;
    }
    if (dwReq & GPIO_DEV_SN_SENSOR_DOOR) {
        // 检测是否开机柜门，没开则置为0
    }
    if (dwReq & GPIO_DEV_SN_SENSOR_PHONE) {
        //检测是否提机，如果提机，则对应的位置为1
        dwMode |= GPIO_DEV_SN_SENSOR_PHONE;
    }
    if (dwReq & GPIO_DEV_SN_SENSOR_HUMAN_DETECT) {
        //检测是否有人，如果有人，则对应的位置为1
        dwMode |= GPIO_DEV_SN_SENSOR_HUMAN_DETECT;
    }
    if (dwReq & GPIO_DEV_SN_SENSOR_CARD_MOUTH) {
        //......
    }
    return ec;
}

DEVICEBASE_API ErrorCodeEnum CreateDevComponent(DeviceBaseClass *&baseObj)
{
    baseObj = new GPIOClassImpl();
    if(baseObj == NULL) {
    return Error_Resource;
    } else {
    return Error_Succeed;
    }
}
DEVICEBASE_API ErrorCodeEnum  ReleaseDevComponent(DeviceBaseClass *&pBaseObj)
{
    if(pBaseObj == NULL) {
    return Error_Param;
    }
    if(GPIOClassImpl* pTmp = dynamic_cast<GPIOClassImpl*>(pBaseObj))
    {
    delete pTmp;
    pTmp = NULL;
    return Error_Succeed;
    }
    return Error_Param;
}