myvtm/DevAdapter/cw/cardissuer.1.1/sankyoStatusInfo.h

// sankyoStatusInfo.h
//
//////////////////////////////////////////////////////////////////////

#if !defined(AFX_SANKYOSTATUSINFO_H__49A9417E_A686_4E79_A9BB_D0C01C00C118__INCLUDED_)
#define AFX_SANKYOSTATUSINFO_H__49A9417E_A686_4E79_A9BB_D0C01C00C118__INCLUDED_

#if _MSC_VER > 1000
#pragma once
#endif // _MSC_VER > 1000

#ifndef SANKYODEF
#include "sankyoDef.h"
#endif

const static IDCErrorInfo sankyoInfoArr[] =
{
    {CWINFO_IDC_S_EMPTY,
     "00", "No Card in detected within ICRW(including card gate)",
     "",
     ""
    },

    {CWINFO_IDC_S_GATE,
     "01", "Card locates at card Gate",
     "",
     ""
    },

    {CWINFO_IDC_S_INSIDE,
     "02", "Card locates inside ICRW(Transport)",
     "",
     ""
    },

};

const static IDCErrorInfo sankyoErrArr[] =
{
    {CWERR_IDC_S_CMD_UNDEF,
     "00", "A given command code is unidentified",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_CMD_PARM,
     "01", "Parameter is not correct",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_CMD_SEQ,
     "02", "Command execution is impossible",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_CMD_NO_DEV,
     "03", "Hardware is not present",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_CMD_DATA,
     "04", "Command data error",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_CMD_LOCKED,
     "05", "Tried to card feed commands before the IC contact release command",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_CMD_NO_KEY,
     "06", "ICRW does not have that decipher the data",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_JAM,
     "10", "Card jam",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_SHUTTER,
     "11", "Shutter failure",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_SENSOR,
     "12", "Sensor failure of PD1, PD2, PD3, PDI/Card remains inside",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_LONG,
     "13", "Irregular card length(LONG)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_SHORT,
     "14", "Irregular card length(SHORT)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_ROM,
     "15", "F-ROM error",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_FORCE,
     "16", "The card was moved forcibly",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_RETRY_JAM,
     "17", "Jam error at retrieve",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_SW_ERR,
     "18", "SW1 or SW2 error",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_NO_R_INSERT,
     "19", "Card was not inserted from the rear",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_READ_P,
     "20", "Read Error(Parity error)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_READ,
     "21", "Read error",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_WRITE,
     "22", "Write Error",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_READ_NO_DATA,
     "23", "Read Error(Only SS-ES-LRC)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_READ_NO_TRACK,
     "24", "Read Error(no encode and/or no magnetic stripe)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_WRITE_Q,
     "25", "Write Verify Error(Quality error)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_READ_SS,
     "26", "Read Error(No SS)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_READ_ES,
     "27", "Read Error(No ES)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_READ_LRC,
     "28", "Read Error(LRC error)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_WRITE_V,
     "29", "Write Verify Error(Data discordance)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_POWER_D,
     "30", "Power Down",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_CAPTURE_FAIL,
     "40", "Card wos pulled out during capture",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_IC_PRESS_FAIL,
     "41", "Failure IC contact solenoid or sensor ICD",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_IC_POS_FAIL,
     "43", "Card could not be set to IC contact position",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_FORCE_EJECT,
     "45", "ICRW ejected the card forcibly",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_NO_WITHDRAWN,
     "46", "The ejected card has not been withdrawn until the specified time",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_OVER_COUNT,
     "50", "Retract counter overflow",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_MOTOR_ERR,
     "51", "Motor error",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_DECODE_ERR,
     "53", "Digital decode read error",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_ANT_PIN_ERR,
     "54", "It shows that Ant-fishing pin does not move correctly",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_ANT_PIN_PRESSED,
     "55", "It shows that the command can not be executed since the pin is down",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_ANT_MOVING,
     "58", "It shows that Anti-fishing pin is during the movement",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_ICC_POWER_ERR,
     "60", "Abnormal condition was found on the power-lin(Vcc) of IC card",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_ATR_ERR,
     "61", "Receiving error of ATR",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_PROTOCOL_DISAGREE,
     "62", "Thespecified protocol does not agreee with that of IC card",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_IC_COM_ERR,
     "63", "IC card communication error(IC card does not respond)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_IC_OTHER_ERR,
     "64", "IC card communication error(Ohter than '63')",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_IC_WAIT_ATR,
     "65", "HOST sends command for IC card communication before receiving ATR",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_PROTOCOL_UNSUPPORT,
     "66", "Tried to communicate with IC card not supported in ICRW",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_EMV_MULT_CARD,
     "67", "Collision error of Contactless IC card(multiple cards detected)(only for EMV activation)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_EMV_FAIL,
     "69", "Tried to communicate with IC card not supported in Protocol EMV",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_HOP_EMPTY,
     "A0", "The card does not exist at the hopper",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_CARD_LEAD,
     "A1", "There is a card at the lead line",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_MST_TIME_OVER,
     "A2", "Transmission error between MST and ICRW(time over)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_MST_RETRY,
     "A3", "Transmission error between MST and ICRW(retry error)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_MST_RETRY1,
     "A4", "Transmission error between MST and ICT(retry error)",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_HOP_JAM,
     "A5", "The card jam at the hopper",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_HOP_POS,
     "A6", "The hopping kicker could not return to the home position",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_MST_MOTOR,
     "A7", "Motor error of MST",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_MST_SENSOR,
     "A8", "SS sensor error of MST",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_SLIDER_EMPTY,
     "A9", "The card does not exist at the slider",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_REJECT_ABNORMAL,
     "AB", "The reject-stacker does not exist./The reject-stacker was filled",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

    {CWERR_IDC_S_NEED_INIT,
     "B0", "Not received initialize command",
     "EEEEEEEEEEEEEEEEEEEE",
     "FFFFFFFFFFFFFFF"
    },

};

#endif // !defined(AFX_SANKYOSTATUSINFO_H__49A9417E_A686_4E79_A9BB_D0C01C00C118__INCLUDED_)