/////////////////////////////////////////////////////////////////////////////////
///	Copyright (c) 2012 China Merchants Bank, all rights reserved	       	  ///
///	  Adapter Interface for RF IC Card.                          	       	  ///
///	                                                             	       	  ///
///	                                                             	       	  ///
/////////////////////////////////////////////////////////////////////////////////
#ifndef __RFIC_CLASS_H
#define __RFIC_CLASS_H

#pragma once

#include "DeviceBaseClass.h"
#include "CardMix.h"

/*const int RF_BLOCK_DATA_SIZE = 16;
const int KEY_SIZE = 6;

struct RFBlockData
{
	DWORD dwSize;
	BYTE data[RF_BLOCK_DATA_SIZE];
};
enum KeyModeEnum
{
	RF_KEYMODE_KEY_A_SET0,	//KEY A,keyset0
	RF_KEYMODE_KEY_A_SET1,	//KEY A,keyset1
	RF_KEYMODE_KEY_A_SET2,	//KEY A,keyset2
	RF_KEYMODE_KEY_B_SET0,	//KEY B,keyset0
	RF_KEYMODE_KEY_B_SET1,	//KEY B,keyset1
	RF_KEYMODE_KEY_B_SET2,	//KEY B,keyset2
};
struct KeyInfo
{
	KeyModeEnum eMode;
	BYTE btSector;	//sector number
	BYTE data[KEY_SIZE];
};*/
struct RFICReaderStatus
{
	CardStatusEnum eMediaPos;	//detect rf card or not:CI_MEDIA_NOTPRESENT,CI_MEDIA_RF
};
class RFICClass : public DeviceBaseClass
{
public:
	//device initialization
	virtual ErrorCodeEnum DevOpen(DWORD dwPort,DWORD dwBaudRate) = 0;
	
		//
	//	Get card reader status
	//
	virtual ErrorCodeEnum GetDevStatus(RFICReaderStatus &devStatus) = 0;
	//
	//	Abort current operation.
	//
	virtual ErrorCodeEnum AbortRead() = 0;
	//
	//	Active contactless card(Type A,B,Mifare)
	//	The first,second,third activation order decided by fstType,scdType,thdType respectively
	//	fstType,scdType,thdType can be one of 'A','B','M','0'(30H,no type)
	//	outType indicates the type of  activation result
	//
	virtual ErrorCodeEnum ActiveContactlessICCard(char fstType,char scdType,char thdType,char &outType) = 0;
	//
	//	Deactivate contactless IC card
	//
	virtual ErrorCodeEnum DeactContactlessICCard() = 0;	
	//
	//	Warm reset card(IC)
	//
	virtual ErrorCodeEnum WarmReset() = 0;
	//
	//	Mifare operation
	//	Arguments:
	//	- eFunType:function type as load key,authentication and so on
	//	- return/data(hex) byte order like BIG EDIAN. ex:0x12345678 --> data[i] = 0x12,data[i+1] = 0x34,data[i+2] = 0x56,data[i+3] = 0x78
	//	- sendBuf:[parameter(hex)][data(hex)]
	//	- recvBuf:[status(1byte)][return data(hex)]
	//		-- [eFunType],[parameter,data],[status(1byte),return data]
	//		-- [CI_MIFARE_LOAD_KEY],[key select(1byte),sector num(1byte),uncoded keys(6bytes)],[status(1byte)]
	//		-- [CI_MIFARE_AUTH],[key select(1byte),sector num(1byte)],[status(1byte)]
	//		-- [CI_MIFARE_READ],[block num(1byte)],[status(1byte),data(16bytes)]
	//		-- [CI_MIFARE_WRITE],[block num(1byte),data(16bytes)],[status(1byte)] 
	//		-- [CI_MIFARE_INC],[source block num(1byte),destination block num(1byte),inc value(4bytes)],[status(1byte)]
	//		-- [CI_MIFARE_DEC],[source block num(1byte),destination block num(1byte),dec value(4bytes)],[status(1byte)]
	//		-- key select(1byte):AKey(00h),BKey(01h)
	//		-- status(1byte):OK(00h),other error code(!00h)

	virtual ErrorCodeEnum MifareCommand(MifareFuctionEnum eFunType,CmdInfo sendBuf,CmdInfo &recvBuf) = 0;
	//
	//	RF Type A,B command.
	//	APDU:Application Protocol Data Unit
	//	Arguments:
	// 	- CmdSend.lpCmd:Command-APDU
	// 	- CmdRecv.lpData:Response-APDU
	//
	virtual ErrorCodeEnum RFTypeABCommand(CmdInfo sendBuf,CmdInfo &recvBuf) = 0;
	
	//halt card
	//card have been halted must move from induction zone then can be found again
	virtual ErrorCodeEnum HaltCard() = 0;
private:
};
#endif //__RFIC_CLASS_H